I bought new front wheels from Catrike in 2018 to replace my original 2009 wheels that had gone the course. They were in bad shape. I was so thrilled to have new wheels on my trike but the thrill was short lived as the new wheels were in worse shape than my old ones in only about a month’s time. In fact, I have been using one of my old wheels for months now as it is in better condition than the newer one. The local streets and trails are in such bad shape that the bumps and holes are destroying my rims. My rear rim that came with my electric hub motor was also destroyed and had to be replaced. I bought a much heavier duty BMX rim to replace the rear rim. I am pleased to report that it has been holding up quite well. So now I am buying two more BMX rims and having my Catrike hubs laced into them. They are the Sun Ringle Envy (rear) rims and are black in color not white as pictured below.
They are considerably wider than the Catrike rims which gives them considerably more strength. Truthfully they probably are not what I would have selected as I like the extra structural pieces available in some other rims I have looked at. The picture below illustrates what I am talking about.
My local bike shop suggested these Envy rims to me and I trusted in their expertise. They assure me that they will be quite strong. Still I would be more comfortable with rims like the one I pictured above as I know they would be stronger.
I am also installing Schwalbe Big Ben Plus tires in place of my beloved Marathon Plus tires.
I am going with heavy duty inner tubes in the Big Ben Plus tires hoping that they will help in preventing flats … externally caused as well as internally caused. They are 5 times thicker than a standard inner tube. I used them once before but they are just too big and difficult to install in smaller sized tires, especially Marathon Plus which are more difficult to install than other tires.
I am still using baby powder inside of my tires and on my inner tubes. The Big Ben Plus do offer some flat protection but they are 40 % less effective than the Marathon Plus tires … meaning that I am concerned about getting flats. I am hoping all goes well and these balloon tires provide enough cushioning to ensure the new rims hold up okay.
I know I will miss certain factors about the Marathon Plus tires. Probably the biggest factor is the incredible mileage I get out of them. I know that these Big Ben Plus tires will wear out much quicker. That means that they will be more expensive to use. I understand that they are suppose to provide fairly decent rolling resistance performance so that is good. Of course, having e-assist helps eliminate some of the concern over this. I may only use them until they wear out and go back to Marathon Plus. I will just have to wait and see. Meanwhile I plan on …
ENJOYING THE RIDE.
A FREE GIFT awaits you!
UPDATE 10-19-2019 … I installed the new wheels with the Big Ben Plus tires today and went for a long ride. I am quite impressed with the tires thus far. They ride nice, roll very good and handle extremely well. Time will tell as to their flat protection and mileage.
2 thoughts on “GOING HEAVY DUTY IN THE WHEEL DEPT.”
I have never used Big Apple tires so I can’t make any comparison. I ran Big Ben tires once before. I ordered Big Ben Plus but they sent regular Big Ben. I liked them but they wore out too fast for my liking.
Would be nice to know how you compare the Big Bens to Big Apples. I had been a die hard Schwalbe supporter but I agree with your observation that some models seem to be wearing out faster now… And I don’t think it’s due to my Donut & Chocolate addiction. Another possibility to consider that seems to get well abused by the BMX crowd is the Maxis DTH – https://www.chainreactioncycles.com/ca/en/maxxis-dth-folding-bmx-tyre/rp-prod87888